Feature:
1.A new pair of headlights from ours allow you to see the road in front of you clearly during the night and in any bad weather that may arise.
2.Gives you and your family safer nighttime driving.
3.Makes your car looks newer.
4.See road markings and traffic sighs better.
5.Driving at night can be a scary proposition - and it's even scarier if you can't see the road well.
6.A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous,not only is your own safety at risk, but the safety of others is as well.
7.Great Replacement or upgrade for factory headlights
8.Adjustment screws for high/low beam
Specifics:
Condition: 100% Brand New
Color: Chrome Housing Clear Lens
Material: Plastic Housing / Polycarbonate Lens
Fitment Type:Direct Replacement
Placement on Vehicle:Front, Left, Right
Manufacturer Part Number: ?€?65904-5261-1620184221
Interchange Part Number:?€?65904-5261-1620184221
Other Part Number:?€?221-0120L 1221-0120R 22853025 22853026 GM2502263 GM2503263
Assembly Type:Composite
Housing Color:Chrome
Lens Color:Clear
Bulb Type: Halogen/Led; High Beam:9005,Low Beam:H11,Signal Light:4157NA(Bulbs Not Included,Please Be Aware)
Fitment:
For Chevrolet Avalanche Base Crew Cab Pickup 4-Door 2007-2013
For Chevrolet Avalanche Black Diamond LS Crew Cab Pickup 4-Door 2013
For Chevrolet Avalanche Black Diamond LT Crew Cab Pickup 4-Door 2013
For Chevrolet Avalanche Black Diamond LTZ Crew Cab Pickup 4-Door 2013
For Chevrolet Avalanche LS Crew Cab Pickup 4-Door 2007-2012
For Chevrolet Avalanche LT Crew Cab Pickup 4-Door 2007-2012
For Chevrolet Avalanche LTZ Crew Cab Pickup 4-Door 2007-2012
For Chevrolet Suburban 1500 Base Sport Utility 4-Door 2007-2012
For Chevr Suburban 1500 LS Sport Utility 4-Door 2007-2014
For Chevrolet Suburban 1500 LT Sport Utility 4-Door 2007-2014
For Chevrolet Suburban 1500 LTZ Sport Utility 4-Door 2007-2014
For Chevrolet Suburban 1500 Z71 Sport Utility 4-Door 2007
For Chevrolet Suburban 2500 Base Sport Utility 4-Door 2009
For Chevr Suburban 2500 LS Sport Utility 4-Door 2007-2013
For Chevrolet Suburban 2500 LT Sport Utility 4-Door 2007-2013
For Chevrolet Suburban 2500 LTZ Sport Utility 4-Door 2007
For Chevrolet Tahoe Base Sport Utility 4-Door 2007-2009 2011-2012
For Chevrolet Tahoe Hybrid Sport Utility 4-Door 2008-2013
For Chevrolet Tahoe LS Sport Utility 4-Door 2007-2014
For Chevrolet Tahoe LT Sport Utility 4-Door 2007-2014
For Chevrolet Tahoe LTZ Sport Utility 4-Door 2007-2014
For Chevrolet Tahoe PPV Sport Utility 4-Door 2012-2014
For Chevrolet Tahoe SSV Sport Utility 4-Door 2012-2014
For Chevrolet Tahoe Z71 Sport Utility 4-Door 2008-2009
Package Include:
1 Pair of Headlights (Driver & Passenger Side)
Note:
1.Please check whether this item can fit on your car before purchasing.
2.Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
TIPS:
Installation:
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.
Adjustment:
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The center lines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlight individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Test your results
Adjustment:
Condensation buildup inside a headlight assembly is normal, and it occurs for a number of reasons.Condensation does not mean that a headlight assembly is defective,After hot, pressurized air has worked its way out of the headlight through the vents, humidity can get drawn in from the outside. So, headlights that have been on during hours of driving become fogged on the inside because their cool temperature creates a low-pressure area that actually draws moisture in.To minimize condensation buildup inside the headlight, make sure any dust boots or covers are on tightly. Also make sure that the headlight vents are not blocked, which could prevent condensation from escaping.
If water collects inside your headlight to the point where puddles form, odds are you've got a crack in the headlight lens cover. Water can also leak in because of improper seals around dust boots where bulbs are inserted. If no cracks or holes are visible around the edges of the headlight, the problem could be the housing itself. If you can visibly locate a crack, it's best to repair it with sealant.
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems
