Description
8 Way Fan Regulating Governor Fan Adapter:
3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub Chassis Fan Pressure Regulating Governor 8 Way Splitter 12V Speed Controller 8 Way with Cable
Features:
1. 1 to 8 PWM Fan Hub: PC fan controller can be connected to 8pcs 2pin???pin/4pin fans to solve the shortage of mainboard interface.It provide a better power supply solution for PC computer case internal motherboard cooling fans.
2. Function: Power interface 6Pin supplies.The governor can supply power to up to 8 fans, and the rotary potentiometer can adjust the speed of up to 8 fans at the same time.(Note:The fan base supports 2Pin???3Pin and 4Pin fans, and the speed of these three fans can be adjusted.)
3. Easy To Use: Chassis fan pressure regulating governor. No Drive, plug-and-play.Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
4. Widely Compatible: For 2 Pin, 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 13A to avoid damage to the governor.
5. Save Space: 8 Way Splitter 12V Speed Controller.The rotary switch with 30cm cable can be installed in any position of the PC case.with sided tape, can fix the governor firmly inside the chassis.
Through this governor, 8 fans can be powered, and the rotating potentiometer can adjust the speed of 8 fans at the same time.
(Note: The fan base supports 2P, 3P and 4P fans, and the speed of these 3 fans can be adjusted).
installation method
1: The adhesive pad at the bottom of the governor can be glued and fixed in the chassis.
2: Make holes on the chassis according to the size shown in the figure, and the potentiometer can be fixed in the hole of the chassis through nuts.
3: Set the screw column on the chassis according to the size of the fixing hole of the circuit board as shown in the figure, and fix the governor on the screw column
Specifications:
Compatible Devices: Computers
Material: Plastic
Pin Type: 6 , 2 , 3 , 4
Size: 8 Way with Cable
Voltage: 12.0 volts
Package Included:
8 Way with Cable Chassis Fan Pressure Regulating Governor
4 Way Fan Regulating Governor Fan Adapter:
2 Pin 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub Chassis Fan Pressure Regulating Governor 4 Way Splitter 12V Speed Controller with 6 Pin Power Port 4 Way with Cable
Features:
1. 1 to 4 PWM Fan Hub: PC fan controller can be connected to 4pcs 2pin???pin/4pin fans to solve the shortage of mainboard interface.It provide a better power supply solution for PC computer case internal motherboard cooling fans.
2. Function: Power interface 6Pin supplies.The governor can supply power to up to 4 fans, and the rotary potentiometer can adjust the speed of up to 4 fans at the same time.(Note:The fan base supports 2Pin???3Pin and 4Pin fans, and the speed of these three fans can be adjusted.)
3. Easy To Use: Chassis Fan Pressure Regulating Governor. No Drive, plug-and-play.Can be directly supplied by 12V power, which can reduce the load pressure of the mainboard.
4. Widely Compatible: For 2 Pin, 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 7A to avoid damage to the governor.
5. Save Space: 4 Way Splitter 12V Speed Controller.The rotary switch with 30cm cable can be installed in any position of the PC case.with sided tape, can fix the governor firmly inside the chassis.
Through this governor, 4 fans can be powered, and the rotating potentiometer can adjust the speed of 8 fans at the same time.
(Note: The fan base supports 2P, 3P and 4P fans, and the speed of these 3 fans can be adjusted).
installation method
1: The adhesive pad at the bottom of the governor can be glued and fixed in the chassis.
2: Make holes on the chassis according to the size shown in the figure, and the potentiometer can be fixed in the hole of the chassis through nuts.
3: Set the screw column on the chassis according to the size of the fixing hole of the circuit board as shown in the figure, and fix the governor on the screw column
Specifications:
Compatible Devices Computers
Material Plastic
Pin Type 6 , 2 , 3 , 4
Size 4 Way with Cable
Voltage 12.0 volts
Package Included:
4 Way with Cable Chassis Fan Pressure Regulating Governor
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems