Magneto Generator Stator For Kawasaki KFX 90 KSF 90 2007-2020 21003-Y005

vipih.comSKU: M550-A291~HWP



Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil

Dimensions :
Interior diameter : 29mm / 1.14 inches
Exterior diameter : 87mm / 3.44" inches
Thickness : 22mm / 0.86 inches

Other Specifications :
Number of wires: 3
Number of pins: 3
Number of plugs: 1
Number of fixation holes: 2

Replacement Part Numbers:

Fit for Kawasaki KFX90 KSF90 2007-2020
Fit for Kymco Mongoose 90 2007-2018

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

Magneto Generator Stator Fit for Kawasaki KFX 90 KSF 90 2007-2020 21003-Y005 Generic

Package Included:
1x Generator Stator Coil

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Free Shipping
Delivery Time: 2-6 working days

Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Customer Reviews

Based on 1 review
Anonymous (Frankfurt am Main, DE)
Great item

This stator works great for Honda. The mounting hole is matched, and it is very cheap! If you install and remove it yourself, the only problem is to remove the flywheel. After that, just remove the two bolts and disconnect some wires and you are good to go.

You may also like

Recently viewed