Description
Pick-up Pulsar / Pulse Sensor Fit For Suzuki DF 40 50 60 70 90 100 115 140 Hp 4 Stroke Outboards 32160-87J00
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 19mm
Length: 23mm
Width: 19mm
Bracket center to center: 35mm
Other Specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2
Replacement Part Number:
32160-87J00
Fitments:
Fit for Suzuki DF40 1999-2009
Fit for Suzuki DF50 1999-2010
Fit for Suzuki DF60 1999-2009
Fit for Suzuki DF70 1998-2009
Fit for Suzuki DF90 2001-2008
Fit for Suzuki DF100 2009-2011
Fit for Suzuki DF115 2001-2010
Fit for Suzuki DF140 2002-2011
Package Included:
1x Pick up pulsar coil
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems
Customer Reviews
Works exactly as it should. The gasket came a little folded, so I laid it flat overnight to get rid of the creases. Installed easily and hasn’t leaked at all.
I purchased this to replace my stator after it failed and took out the connectors between the rectifier and stator with it. Installation is easy if you have good patience and can follow a YouTube video there are no problems with fitment However, I opted to use a rubber gasket instead of the one included in the package.
this worked but I had to cut grommet to pull wires longer to fit grommet into the crankcase. hopefully the stator does work !
Everything was great.It got here on time.It fit perfectly. Now it's just wait and see if that was the solution to my problem.
It would be really awesome if yall could get back to customs where the aluminum was casted, other than the hold in customs i hope it works well and my package arrived soon!