Feature:
1: New and in a good condition
2: Top-grade material with delicate workmanship, durable to use
3: Uneasy to deform or break
4: A practical tool for daily life
5: Used for sealing package so as to keep food from deterioration
6: Suitable for Plastic Bags,Bubble Bags,EPE Bags,Aluminum Foil Bags,Kraft Paper Bags,Tea Bags, PE/PP Bags ,ect
Specifics:
Condition: 100% Brand New
Material:Metal
Color:Light Blue
Voltage:110V
Plug:US Standard
Dimensions(L x W x H):420mm*130mm*85mm
Max sealing length:300mm
Max sealing width:3mm
Note:
1.Please allow 1-3mm difference due to manual measurement.
2.Always keep the sealing surface clean, avoid any residue oxidation on the surface to reduce ribbon heater and lifespan of heat-resisting fabric.
3.Don't use wet cloth to scrub sealing surface.
4.Worn-out liner under ribbon heater will cause short circuit and finally damage the ribbon heater. So, it is a must to check up liner condition every time you change ribbon heater. Replace a new one once there is any damage.
5.When you have to change the ribbon heater, you must choose a ribbon heater with the same specification to original one.
6.Suggest to keep heating gear between 3-5 mode, it helps to extend the lifespan of machine; long-term working on high-gear will easily lead to burn-up of inner parts. If the inner coil is burnt out, the machine will be disposed as scrap.
Package Included:
1x Impulse Heat Sealer
How to Use
1.No power switch required (auto-control), link the AC power cord with socket, adjust heating time just according to the thickness of sealing-in material; put the plastic bag on the sealing-in surface and press the handle, the circuit will automatically control heating time. The power will automatically shut down when the indicator light goes out. After 1-2 seconds, release the handle to finish sealing.
2. Any damage occurs during sealing is because of over-long heating time, please spin the rotary knob anticlockwise to shorten heating time.
3. Too-short heating time will cause unstable sealing. Please spin the rotary knob clockwise to lengthen heating time
4. If the plastic bag sticks to rubber pressing board, it means the cooling time is insufficient. You must lengthen the cooling time after indicator light extinguishment. Slightly late to release the handle
5. Remain the heating time unchanged after adjustment, and no need to adjust it during continuous service.
6. Keep AC power cord always inserting on the socket, no electricity consumption when there is no sealing.
Troubleshooting
The following listed cases are excluded to quality issue
1. Repeated usage of heater strip breaks due to autoxidation, which leads to electricity failure, suggest to replace a new one (oxidation under high-temperature is normal phenomenon)
2. Inner coil burnout or damage caused by overload continuous usage or wrong operation
3. Any man-made damage leads to non-operation cases
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems
